Kodak A A Uživatelský manuál stáhnout pdf (Strana 5)

Replacements and Installations

SM4530-1 – 30APR96 5

Replacing the FAN SHAFT ASSEMBLY

Warning

Dangerous Voltage

[1] Disconnect the main power.

[2] Do the replacement procedure for the LOWER HOUSING ASSEMBLY.

[3] Cut the 3 WIRE TIES:

• 1 on BLOWER COVER wires

• 2 on SMALL CIRCUIT BOARD between the MOTOR and MECHANISM ASSEMBLY

[4] Disconnect the 2 wires from the CYCLE SOLENOID on the SMALL CIRCUIT BOARD.

[5] Pull the SMALL CIRCUIT BOARD up.

[6] Remove the

Torx SCREW from the BLOWER COVER ASSEMBLY.

[7] Lift the GRILLE ASSEMBLY in front of the BLOWER COVER ASSEMBLY up.

[8] Loosen the

Torx

SCREW on the right track of the LOWER LIGHT BAFFLE ASSEMBLY appoximately half way.

[9] Lift the LOWER LIGHT BAFFLE ASSEMBLY off the TAB on the BLOWER COVER ASSEMBLY.

[10] Remove the 2 long

Torx

SCREWS from the BLOWER COVER ASSEMBLY.

A100_0013HA

BR and KK models

A100_0013HCA

WIRE TIE (not shown)

BLOWER COVER WIRE TIE

GRILLE ASSEMBLY

1 2 3 4 5 6 7 8 9 10 ... 53 54

Žádné komentáře

Kodak A A Uživatelský manuál Strana 5